We do not have a photo of this item yet. Check the model numbers below before you order.
Specs
- Made by
- Waterdrop
- SKU
- WD-G3P800-N2RO
- Waterdrop model
- WD-G3P800-N2RO
- Type
- Replacement filter
- Category
- RO replacement filter
- Change about every
- 24 months
- Rated capacity
- 2,900 gallons
- Daily output
- 800 gallons per day
- Filter life, as stated
- 24 months or 2900 gallons
Specs are from Waterdrop's product page. Anything Waterdrop does not state is left out.
Fits these models
Listed for
What it is certified for
We show only the certification statements Waterdrop gives for this product, word for word. You can check them in the certifier's public listing.
About this filter
This is the Waterdrop WD-G3P800-N2RO replacement filter for reverse osmosis systems. It is made by Waterdrop for homeowners who need a fresh RO cartridge for their under-sink unit.
Reverse osmosis systems use a membrane and a drain line to filter your drinking water. Replacing this cartridge on schedule keeps your system working as intended.
Filter life and capacity
The WD-G3P800-N2RO has a rated capacity of 2,900 gallons. Waterdrop states the filter life is 24 months or 2900 gallons. You should plan to change it about every 24 months.
A filter handles a set amount of water before it fills up. Change your cartridge sooner if the filter light comes on or if the water flow slows down. Many filter lights track time or water used rather than testing the water itself.
Installation and plumbing safety
Always turn off the cold water supply before you remove an under-sink filter. Reverse osmosis units also connect to a small drain line, so keep a small towel ready for drips.
After inserting the new cartridge, run water through it before drinking. Follow the flushing directions on the product box. If you ever feel unsure about doing this plumbing work, call a licensed plumber.
What it fixes
- Replaces an expired RO cartridge in your system
- Restores proper water flow if your old filter has slowed down
- Resets your reverse osmosis system maintenance cycle
- Supports a daily output of 800 gallons per day
How to confirm it fits
- Check the front or side label of your system for model number G3P800.
- Look at the label on your existing filter to confirm it matches WD-G3P800-N2RO.
- Confirm your setup is an RO system that fits model G3P800.
- Verify this replaces part number G3P800.
- Match your system specs to a daily output of 800 gallons per day.
Questions
Which systems does the WD-G3P800-N2RO filter fit?
It fits the Waterdrop G3P800 reverse osmosis system. It also replaces part number G3P800.
How often should I change this filter?
Change it about every 24 months. Waterdrop states the filter life is 24 months or 2900 gallons, but you should replace it sooner if water flow slows down.
What is the rated capacity of this filter?
The rated capacity is 2,900 gallons, and it supports a system daily output of 800 gallons per day.
Do I need to flush the filter after installing it?
Yes. Always run some water through a new filter before you drink it. Check the product box for the exact flushing steps.
Guides for this filter
Shipping and returns
Orders ship from Waterdrop in 1 to 3 business days. Free standard shipping on orders over $35.
Wrong fit or a problem? Contact us within 30 days of delivery.
Full shipping and return policy