We do not have a photo of this item yet. Check the model numbers below before you order.
Specs
- Made by
- Waterdrop
- SKU
- WD-G2P6MRO
- Waterdrop model
- WD-G2P6MRO
- Type
- Replacement filter
- Category
- RO replacement filter
- Change about every
- 24 months
- Rated capacity
- 3,300 gallons
- Flow rate
- 0.42 gpm
- Filter life, as stated
- 24 months or 3,300 gallons
Specs are from Waterdrop's product page. Anything Waterdrop does not state is left out.
Fits these models
Listed for
What it is certified for
We show only the certification statements Waterdrop gives for this product, word for word. You can check them in the certifier's public listing.
About this filter
The Waterdrop WD-G2P6MRO is an RO replacement filter made by Waterdrop. It is designed for homeowners who own the G2P600 reverse osmosis system.
This filter provides a flow rate of 0.42 gpm. It has a rated capacity of 3,300 gallons to keep your drinking water flowing smoothly.
Before you install
Always turn off the cold water supply before you remove or replace an under-sink reverse osmosis filter. If you feel unsure about any plumbing steps, call a licensed plumber for help.
After inserting the new filter, run water through it before drinking. Follow the flushing directions listed on the product packaging.
Filter life and capacity
The WD-G2P6MRO filter has a stated filter life of 24 months or 3,300 gallons. Change it about every 24 months under normal use.
A filter is built to handle a set amount of water. You should change it sooner if the water flow slows down or if your system indicator light turns on.
What it fixes
- Replaces an expired filter in your G2P600 reverse osmosis system.
- Restores water flow if your current filter is clogged and running slowly.
- Addresses system alerts when the filter replacement light turns on.
- Helps maintain your reverse osmosis system for up to 3,300 gallons or 24 months.
How to confirm it fits
- Check the front or side label of your reverse osmosis unit to confirm the system model is G2P600.
- Look at your existing filter cartridge and confirm it shows part number WD-G2P6MRO.
- Verify that your system uses Waterdrop replacement filters.
- Check that your unit is listed as replacing G2P600.
Questions
What systems does the WD-G2P6MRO filter fit?
It fits the Waterdrop G2P600 reverse osmosis system.
How often should I change the WD-G2P6MRO filter?
The stated filter life is 24 months or 3,300 gallons. Change it about every 24 months, or sooner if water flow slows down.
What is the flow rate of this filter?
The WD-G2P6MRO has a flow rate of 0.42 gpm.
Does the system filter light test my water quality?
No. Many RO filter lights track time or water used. They do not test the water.
Guides for this filter
Shipping and returns
Orders ship from Waterdrop in 1 to 3 business days. Free standard shipping on orders over $35.
Wrong fit or a problem? Contact us within 30 days of delivery.
Full shipping and return policy