Whirlpool EDR2RXD1 Refrigerator Water Filter
Out of stock
The EDR2RXD1 is a Refrigerator water filter listed under the Whirlpool brand name. It is designed to work inside your refrigerator.
This filter is out of stock right now, so it cannot be added to the cart.
This part is for the water and ice in your fridge door. It filters the water before it reaches the ice maker or the water dispenser.
Specifications
| Part number | EDR2RXD1 |
|---|---|
| Brand | Whirlpool |
| Type | Refrigerator water filter |
| Depth | 2" |
| Height | 7.5" |
| Width | 2" |
From the maker's and filter sellers' listings for this number. Compare with the label on your old filter.
Listed as replacing
What the EDR2RXD1 Filter Does
This Refrigerator water filter is used to filter water for your fridge door dispenser and ice maker. A filter is built to handle a set amount of water, its rated capacity.
Over time, the filter collects material from the water line. When the filter reaches its capacity, water flow may slow down. Replacing the cartridge keeps clean water moving to your dispenser and ice maker.
Filter Specifications
Matching the physical size of the filter helps ensure it fits inside the filter housing in your refrigerator. The dimensions for this part are listed below.
- Height: 7.5"
- Width: 2"
- Depth: 2"
How to Confirm a Match
Fit is matched by model: search the model of your system, the number on your old filter, or your fridge model. You can check the label on your existing cartridge to see if it shows part number EDR2RXD1.
Many models list their model number on a label: on the side or front of a water system, on the old filter, or inside a fridge on a side wall. Compare the markings directly to verify a match before you install a new part.
When to Replace and How to Install Safely
Typical change intervals are rough guidance: fridge filters about every 6 months. The interval on the product page and in the manual always wins. Change it sooner if water flow slows or the filter light comes on.
Many fridge and RO filter lights track time or water used. They do not test the water. When it is time to install a replacement, remove the old unit, seat the new cartridge firmly in place, and follow the flush steps on the box or product page before drinking the water.
Read your old filter
- Locate the existing water filter inside your refrigerator or water compartment.
- Remove the filter carefully and look at the printed product label.
- Check for the part number EDR2RXD1 printed on the label.
- If the label is missing, check the model label inside your fridge on a side wall to look up your fridge model.
When to call a pro
If you are not sure about plumbing work, or if you run into leaks that do not stop, hire a licensed plumber.
Questions
How often should I change this refrigerator filter?
Typical change intervals are rough guidance: fridge filters about every 6 months. Change it sooner if water flow slows or the filter light comes on. The interval on the product page and in the manual always wins.
Does the filter indicator light mean my water is dirty?
Many fridge and RO filter lights track time or water used. They do not test the water. The light serves as a reminder to change the cartridge based on time or volume.
What should I do right after installing a new filter?
Run some water through a new filter before you drink it. Always follow the flush steps printed on the box or the product page.
Where can I find my refrigerator model number to check fit?
Many models list their model number on a label inside a fridge on a side wall. You can also match by the number printed directly on the old filter.
More filter part numbers
All filter part numbers · Shop refrigerator · Guides
Brand names and part numbers identify the filter and show fit. H2O Buddy is not affiliated with, authorized by, or endorsed by any appliance maker.